The K9 Toyota Tacoma Bed Rail Rack is the latest rack option from the legendary Eezi-Awn brand. It uses the same platforms as the K9 Roof Racks, but with a unique bed rail mounted leg designed specifically for Toyota’s under rail mounting channel. It saddles on the bed rail top surface, and attaches to the channel under the bed rail with 2 bolts per leg. It then attaches to the bottom cross braces on the K9 Platform, for a very stout rack solution over the bed of your truck.
Sizes
The K9 Bed Rail Rack for the Toyota Tacoma is a great size solution for both the 5’ and 6’ bed. The bed rail legs taper in on each side from the bed rail to give it a very sleek look. The length is within inches of the front and back of the bed. The rack is low enough to provide access to items in the bed, and still keep your equipment below cab high for great aerodynamics and low center of gravity. Perfect for adding a Roof Top Tent. With the tailgate locked, it also provides protection against theft of your equipment.
Capacity
Capacity of the K9 roof rack system is broken into two measurements, static weight and dynamic weight. Static is when the vehicle is stationary. Dynamic is when the vehicle is in motion. We have not tested the K9 racks on vehicles to the point of roof failure. We can tell you what we have tested ourselves effectively. A dynamic capacity in the range of 500 pounds is possible. That load included a RTT, awning, dual fuel can holder, aluminum storage case with recovery gear, shovel, axe, under mount table, light bar, etc on a 2.2M long rack. A static capacity of 1000 pounds is possible. An example of static load increase would be adding people in the tent on the roof. Please understand these capacities are on vehicles that have modified suspensions designed to manage this amount of weight. They are not a warrantied or guaranteed capacity. Your load capacity will vary.
No Drilling
The K9 Roof Rack System for the Tacoma Bed Rail requires no drilling at all for any size rack. Our proprietary Bed Rail Legs attach directly to the OEM under rail channel. All hardware included.
Installation
Installation of this rack system can be done by one person in approximately 1 hour. Help lifting the platform on the bed would be appreciated. You start by installing the Bed Rail Leg threaded plates into the under rail channel. Attach the Bed Rail Leg to the plates with the included hardware, leaving them loose for lateral adjustment. Lay platform on top of Bed Rail Legs, and locate legs under each corresponding cross brace. Attach legs to the platform with associated hardware, loose for the moment. Align rack where you prefer, front to back and side to side. Tighten legs to channel and to platform. All good to go.
System Components
The components used on the Tacoma bed rail rack systems include a set of K9 Bed Rail feet (2 per platform cross brace), and a platform.
System Accessories
The Eezi-Awn K9 Roof Rack System comes with a complete array of bolt on accessories. Jerry Can holders, Axe mounts, Shovel mounts, Hi-Lift Mounts, Max Trax Mounts, Awning Mounts, Under Rack Table mounts, and much more. Take a look at the accessories page to see all our options.
Toyota Bed Rail Rack Kit Features
Fully Welded 1-3/8"H Low-Profile Platform
Lightweight All Aluminum Construction
All Components Are Anodized And Powder Coated Matte Black
5-1/8" Wide M8 T-Slot Slats, Running Front to Back
Semi-Elliptical Bottom Cross Braces To Reduce Wind Noise
M6 T-Slot Around Top Perimeter With Rounded Top Edge
Full Complement of K9 Roof Rack Accessories For Top/Bottom/Side Mount
Infinite Gear Organization Configurations
Includes All Installation Components & Hardware
Toyota Tacoma Bed Rail Rack Kit Specifications
Platform: 5’ Bed - 1400mmW x 1400mmL (55”W x 55”L x 1.38”H)
Platform: 6’ Bed - 1400mmW x 1600mmL (55”W x 62”L x 1.38”H)
K9 Bed Rail Legs: 5’ Bed - 6 Legs, 6’ Bed - 8 Legs
Eezi-Awn K9 Bed Rail Rack Instructions (Coming Soon)
Related Media
K9 Bed Rail Rack Overview Video (Coming Soon)
FREE SHIPPING
We offer Free Shipping in the contiguous United States on all brands we import.
National Luna
Eezi-Awn
AluBox
Escape Gear
Orders to Alaska and Hawaii may require additional charges.
EEZI-AWN
Eezi-Awn products will be shipped free of charge.
Due to the size and weight of the roof top tents and rack platforms, we will only ship within the contiguous U.S. using truck freight. We will ship to any commercial address with a fork lift or a loading dock, or a freight facility close to you for pickup. This can be unloaded on a dock with a pallet jack. Smaller items that can be shipped by ground can be delivered to residential or commercial addresses.
NATIONAL LUNA
National Luna products will be shipped free of charge.
Due to the size and weight of the larger fridges (size 110L and larger), we will only ship within the contiguous U.S. using truck freight. We will ship to any commercial address with a fork lift or a loading dock, or a freight facility close to you for pick up. This can be unloaded on a dock with a pallet jack.
ALUBOX
AluBox cases size 10L to 175L will be shipped to a residential or commercial address free of charge.
Due to the size and weight of the larger boxes (size 192L and larger), we will only ship within the contiguous U.S. using truck freight. We will ship to any commercial address with a fork lift or a loading dock, or a freight facility close to you for pick up. This can be unloaded on a dock with a pallet jack.
ESCAPE GEAR
Escape Gear products will be shipped to a residential or commercial address free of charge. We carry a great deal of Escape Gear inventory, and will fulfill all orders that we have from our US facility. In some cases, Escape Gear products are custom-made and built one at a time in Cape Town, South Africa. This means that they ship directly from Cape Town to you. Our best estimate for delivery of these single-batch products is 6-8 weeks. You will be notified of this production and delivery time frame at the time of order.
TRAIL KITCHEN
Please note that there is a 4-6 week production lead time on all Trail Kitchen products. Trail Kitchen Van Kitchen and Mini Van Kitchen products are shipped by truck freight from the manufacturer. This pricing can vary between $150 to $500 per package based on distance and destination. You will checkout with a zero cost shipping payment and we will contact you with an exact quote and collect payment at that time. All other products ship at a flat rate of $55 at checkout.
GOOSE GEAR
Return, Exchange, and Cancellation Policies
If your order contains incorrect products or has been damaged in transit, documentation and photos are required within 72 hours of receiving the order.
If you are dissatisfied with the product once your order is received, you are solely responsible for return shipping costs.
Products must be returned in original packaging and adequately protected for carrier handling. Returned product will be inspected for damage or evidence that it was installed. Upon return, Goose Gear, in its sole discretion, will assess product’s condition for resale. A restocking fee of 20% will be applied to the amount. If product is not resalable, we cannot accept a return.
Once an order is placed, if that order is canceled within its predicted production timetable, you will be charged a 20% cancellation fee.
Warranty Policies
Original Purchaser is eligible for warranty coverage with valid proof of purchase.
All warranty issues will be resolved directly by Goose Gear and End User, where it applies. Goose Gear will communicate directly with End User to review defect and extend appropriate remedies as warranted.
NO MORE, NO LESS
The products we carry vary in size and weight as much as your delivery location. In light of this fact, we will charge you only what it costs us to ship to you, no more and no less. Unless otherwise requested, we will select a shipping option that minimizes cost. We will inform you of the cost of shipping as reasonably soon as possible. We will be happy to ship via Next Day Air, Second Day Air, or Three Day Select if you request it and are willing to pay for it.
SIGNATURE
You spent money on it and we want to ensure its safe delivery. All shipments under $200 will not require a signature for delivery. All shipments over $200 will require a signature unless otherwise specified. Please contact us if you would like to remove this feature from your order. This service is complimentary.
LARGE ITEMS
Please be aware that larger items, including Eezi-Awn tents and racks and Goose Gear storage solutions, which are too large for traditional ground shipping, will require truck freight for delivery, and custom items shipping internationally are not eligible. We offer Free Domestic Shipping on Eezi-Awn tents and racks to a commercial address. Roof Top Tents will require a loading dock or forklift or a freight terminal close by for pick up. Roof Racks will require the ability to receive a large platform box; however Rack Feet and Rack Rail can be shipped to your residence. If you order a tent or rack from our website, contact us by phone or email and we will work with you to secure the most economical delivery of your product we can.
RESIDENTIAL
If you plan to ship a large item noted above to a residential address, please check that option during checkout, and you will be charged a small additional fee. Because of their size, Hard Shell Roof Top Tents cannot be delivered to a residence.
CANADA & INTERNATIONAL SHIPPING
Equipt is the North American distributor for Eezi-Awn, National Luna, Alubox and Escape Gear. We have contractual agreements with our vendors to not ship products outside North America. An option for you would be to ship our products to a freight forwarder within the US, where you can arrange to continue their journey to your shores.
We do offer shipping to Canada. Shipping expenses will apply on all lines. Contact us directly for costs to ship to your Canadian address. We will not be responsible for any duties or fees associated with crossing the Canadian border to your residence. We ship a lot of products to independent packaging stores all along the US/Canadian border, for Canadian customers to pick up on our side. This option is very cost effective, if you have the opportunity to come to the US.
TURN AROUND TIME
We always work to ship every order as quickly as possible, but we're a small team and we ask that you read our shipping policy so that we can set the right expectations.
Unless an expedited shipping method is requested, it's best to assume that from the time we receive your order during our office hours, Monday through Friday, and add it to our queue, it takes our team a few business days to start preparing your shipment. There is also the additional shipping time based on your location from our warehouse in Salt Lake City, Utah. These transit maps offer a helpful timeline for most orders:
Please note that we do not handle or ship orders over the weekend.
HOLIDAY DEADLINES
Shipping around the holidays can get a little crazy. We do our best to get your packages out within 48 hours, but once they leave our warehouse, it's in the hands of our carriers to handle the rest. Oftentimes they experience delays and unforeseen weather. The best way to ensure your package arrives by a certain date is to expedite the shipping, not wait until the last minute, and even order a few extra days in advance.
RETURN CHARGES
If your order did not arrive accurately, we will pay the return shipping charges and refund to you the amount of shipping you paid on that particular product. If you received what you ordered but are dissatisfied with it, you will be responsible to pay the return shipping charges and the initial shipping charge.
Please note that order cancellations on Goose Gear products are subject to a 20% restocking fee.
